Sierra Wireless AirLink LX40 Hardware User's Manual page 2

AirLink LX40 Series Hardware User Guide
Important
Due to the nature of wireless communications, transmission and reception of data can
Notice never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
Although significant delays or losses of data are rare when wireless devices such as the
Sierra Wireless product are used in a normal manner with a well-constructed network, the
Sierra Wireless product should not be used in situations where failure to transmit or
receive data could result in damage of any kind to the user or any other party, including
but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no
responsibility for damages of any kind resulting from delays or errors in data transmitted
or received using the Sierra Wireless product, or for failure of the Sierra Wireless product
to transmit or receive such data.
Safety and
Do not operate the Sierra Wireless product in areas where blasting is in progress, near
Hazards
medical equipment, near life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the Sierra Wireless product
MUST BE POWERED OFF. The Sierra Wireless product can transmit signals that could
interfere with this equipment.
The driver or operator of any vehicle should not operate the Sierra Wireless product while
in control of a vehicle. Doing so will detract from the driver or operator's control and
operation of that vehicle. In some states and provinces, operating such communications
devices while in control of a vehicle is an offence.
Warning:
THE AREA IS KNOWN TO BE NON-HAZARDOUS.
Avertissement:
EST SOUS TENSION, A MOINS QU'IL NE S'AGISSE D'UN EMPLACEMENT NON DANGEREUX.
Warning:
Avertissement:
DANGEREUX.
Warning:
Avertissement:
DANGEREUX.
This device is suitable for use in Class 1 Div 2 Groups A, B, C, and D T4 locations.
Ambient temperatures of -30C to +60C. UL Listed for use in ambient temperatures not
exceeding 60C.
Warning:
known to be free of ignitable concentrations.
Rev. 2 January 2021
EXPLOSION HAZARD—DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS
RISQUE D'EXPLOSION—NE PAS DEBRANCHER TANT QUE LE CIRCUIT
DO NOT USE THE USB CONNECTOR IN A HAZARDOUS AREA.
NE PAS UTILISER DE CONNECTEUR USB DANS LES ENVIRONNEMENTS
DO NOT USE THE RESET BUTTON IN A HAZARDOUS AREA.
NE PAS UTILISER LE BOUTON DE RESET DANS UN ENVIRONNEMENT
Explosion Hazard. Do not connect or disconnect while circuit is live or unless the area is
2 41112510