Ex I Terminal Compartment; Connection Of Ex I Keyboard To The Polaris (Optional) - Bartec POLARIS Remote KVM Analog Series User Manual

POLARIS REMOTE - for Zone 1/21
POLARIS Remote KVM Analog 15" / 19.1"
6.7

Ex i terminal compartment

6.7.1

Connection of Ex i keyboard to the POLARIS (optional)

Technical data subject to change.
08/2019
Do not connect the keyboard, mouse, trackball, touchpad, joystick or the hand scanner
while the power supply is active.
DANGER
Accessories which have not been approved jeopardise the explosion protection.
Danger to life exists in an explosive atmosphere!
Only use POLARIS accessories!
The cover for the Ex i terminal compartment need not be used when deploying a
protective enclosure with protection class of at least IP20.
PS/2 for input devices
Terminal Interface Colour
X4 PS/2 WH/BR
X5 PS/2 GN/YE
X6 PS/2 PK
X7 PS/2 GR
X8 PS/2 BL
X9 PS/2 RD
Make the connection between the POLARIS and the Ex i keyboard.
–
Connection by means of a 1.80-metre-long connection cable
–
Keyboard and mouse
–
Keyboard and trackball/joystick
–
Keyboard and touchpad
–
(Optional: 3-metre-long connection cable)
Signal Remarks
VCC Supply voltage
GND Mass connected to protective earth
KB_CLK Keyboard
KB_DATA Keyboard
MS_CLK Mouse
MS_DATA Mouse
type 05-0068-0163
type 05-0068-0172
type 05-0068-0183
Installation
clock signal
data signal
clock signal
data signal
EN 29/48