POLARIS REMOTE
- for Zone 1/21
POLARIS Remote KVM Analog 15" / 19.1"
5.4
Assembly
5.4.1
Installation options
Technical data subject to change.
08/2019
Before assembling the device, make sure you have all the components and documents.
Required Tools
POLARIS (mounting clamps)
POLARIS termination-compartments
POLARIS PE-connection
POLARIS accessories
System solution in an
"Exclusive II" stainless steel enclosure e
The POLARIS can be installed directly in:
Enclosures
–
Switch cabinet doors
–
Operating consoles
–
The POLARIS series are mounted by fitting them into front panels, which can be done
with very little effort. On request, we supply the operating devices as ready-to-use system
solutions in stainless steel enclosures for mounting onto walls, floors or table.
Illustration 5: Examples of floor, wall and table mounting in an "Exclusive II" enclosure
Transport, storage,
scope and assembly
1 x hex key 3 mm
1 x slotted screwdriver
1 x hex key 2,5 mm
1 x slotted screwdriver
1 x ring spanner 7 mm
1 x socket wrench 5.5 mm
1 x hex key 5 mm (to fix the supporting
system in place)
EN 17/48