Table of Contents
Advertisement
Basic
safety instructions
1.1.1
Languages
1.1.2
Changes in the document
1.2
Handling the product
1.3
Intended use
1.3.1
Exclusive purpose
EN 2/48
POLARIS REMOTE
- for Zone 1/21
POLARIS Remote KVM Analog 15" / 19.1"
ATTENTION
ATTENTION describes a possibly damaging situation. If not avoided, the plant or
objects in its vicinity may be damaged.
Important information on effective, economical & environmentally compliant handling.
The original user manual with safety information is written in English. All other available
languages are translations of the original user manual.
The user manual is available in English. If further languages are required, these must
be requested from BARTEC or stated on placing an order.
BARTEC reserves the right to change the content of this document without notification.
No warranty is assumed for the correctness of the information. In cases of doubt, the
German safety instructions apply because it is not possible to rule out errors of
translation or printing. In the case of legal disputes, the "General Terms and Conditions
of Business" of the BARTEC GmbH also apply.
The current versions of the datasheets, operating instructions, certificates and EC
declarations of conformity can be downloaded from www.bartec.de or may be
requested directly from BARTEC GmbH.
The product described in these operating instructions has been tested and left the
factory in perfect condition as regards meeting safety requirements. To maintain this
condition and ensure that this product operates perfectly and safely, it may be used
only in the manner described by the manufacturer. Appropriate transportation, suitable
storage and careful operation are also essential for the perfect and safe operation of
this product. The POLARIS must be installed properly and securely if it is to work
perfectly and correctly.
The safe and perfect mounting of the POLARIS is a precondition for faultless and
correct operation.
It is used exclusively in combination with operating devices which satisfy the
requirements for Overvoltage Category I.
The POLARIS REMOTE KVM Analog series have been designed specially for use in
hazardous (potentially explosive) areas in Zone 1 or Zones 21.
It is essential to observe the permissible operational data for the device being used.
Technical data subject to change.
08/2019
Advertisement
Table of Contents
