Page 3
Dear Customer, Thank you for deciding for a high-quality training equipment of the brand Darwin, the brand that makes athlete‘s hearts beat faster. Darwin offers a wide range of home fitness equipment like elliptical cross trainers, ergometers, tread-mills and rowing machines. Darwin equipment is the optimal equipment for all those who want to train at home independent of goals and fitness level.
2.1 General instructions 2.2 Faults and troubleshooting 2.3 Maintenance and service calendar ASSEMBLY 3.1 Assembly instructions WARRANTY INFORMATION DISPOSAL ORDERING ACCESSORIES ORDERING SPARE PARTS 7.1 Service hotline 7.2 Serial number and model name 7.3 Parts list 7.4 Exploded drawing Weight Bench FB70...
GENERAL INFORMATION Technical data Article weight (gross, including packaging): Article weight (net, without packaging): 27 kg Packaging dimensions (L x W x H): approximately 124.5 cm x 47 cm x 21 cm Set-up dimensions (L x W x H): approximately 151.6 cm x 72.8 cm x 122.3 cm Maximum user weight: 100 kg/220 lbs Personal safety Before you start using the equipment, you should consult your physician that this type of...
The equipment should be placed on a level and solid surface, any unevenness in the floor should be leveled out. A floor protective mat / equipment underlay can help to protect high-quality floor coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness. Weight Bench FB70...
ASSEMBLY INSTRUCTIONS, MAINTENANCE AND CARE General instructions Please check if all parts belonging to the equipment are included in the delivery and if there is any transport damage. If there are any complaints, please contact your contract partner directly. Some of the nuts and bolts to be used in assembly can already be pre-mounted in order to make set-up as easy as possible.
The indoor cycle must be cleaned after every training session with a moist towel (no solvent!) in order to avoid damage caused by sweat. The following routine work must be executed in the specified time intervals: Part Weekly Monthly Annually Check screws Weight Bench FB70...
ASSEMBLY In order to make the assembly of the equipment easier, we recommend that you do not initially fully tighten the screws. However, you should make sure that all screws are firmly tightened after assembly. Assembly instructions Step 1: 1. Attach the main frame (1) to the horseshoe base (3) and front base (2) with four square neck bolts (14) and two bolts (17), eight washers (21) and six lock nuts (23).
Page 10
3. Attach the seat cushion (26) to the main frame (1) with four bolts (15) and four washers (20). 4. Attach the back cushion (27) to the back bracket (5) with six bolts (16) and six washers (20). Weight Bench FB70...
Warranty periods The following warranty periods begin on delivery of the fitness equipment. Model Full warranty Weight bench FB70 Home use 24 months Repair costs According to our choice, there will either be a repair, a replacement of individual damaged parts or a complete replacement.
Page 12
For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy. Weight Bench FB70...
DISPOSAL At the end of its operational life, this equipment cannot be disposed of in normal household waste. Instead, it must be disposed of via an electricals recycling centre. Further information can be obtained from your local authority‘s recycling service. The materials can be recycled as per their symbols.
10:00 - 17:00 Serial number and model name Before assembling your equipment, find the serial number on the white sticker and enter it in the appropriate space. Serial number: Brand / category: Model name: DARWIN Hantelbank DF-FB70 Weight Bench FB70...
Parts list Description Specification Qty. Main Frame Front Base Horseshoe Base Adjustment Bar Back Bracket Foam Tube Φ25*1.2 Axle Φ16*1.5*120 Nylon Axle Φ20*93 Axle Φ16*1.5*170 Foam Φ23*Φ90*170 Handle Bar Φ19*75 Foam Plug Φ25 Square Plug 50*25 Square Neck Bolt M10*65 M10*65 Bolt M8*20 M8*20...