Appendix H: Renamin - AFM Workshop LS-AFM User Manual

Appendix H: Renaming National Instruments DAQ Device
The following procedure will allow the user to reset the National Instruments DAQ card reg-
istry with the device number corresponding with the user's Ebox. This may be useful if the
user's AFM-View Software does not initialize.
Open the NI MAX: Measurement and Automation Explorer software as follows:
a. Expand Devices and Interfaces under My System on the left scroll tab.
b. Making sure the correct Ebox USB is plugged into the computer, delete any
devices that are not green. There should only be one green device, corresponding
with the DAQ card in the user's Ebox.
c. Rename the only remaining green device as Dev1. This can be accomplished by
right-clicking on the device and selecting Rename.
V 1.1 / LS-AFM Users Guide
Appendix H-1