Automatic Closing; Courtesy Lights; Flashlight In Pause - V2 PD9 Manual

nection "courtesy light" becomes an auxiliary connection to which it is possible to match one of the
following functional logics:
monostable: it activates the output relay through all the tx transmission time, when the
transmission ends the relay is disconnected.
bistable: it activates the relay with the tx first transmission, the relay disconnects with the
second transmission.
timer: the tx transmission triggers the relay which disconnects automatically after a time
adjustable between 0 and 999 seconds.
t.LUC Courtesy lights switch on when the gate moves and when it stops they stay switched on for
a time which can be set up from 0 to 20 minutes.
CiCL the courtesy lights are on through the whole cycle.
AUS auxiliary exit with adjustable logical functioning.
If the function selected is AUS, one of the following will appear on the display:
tiM timed auxiliary exit (time adjustable from 0 to 999 seconds)
biSt auxiliary output relay with bistable functioning
Mon auxiliary output relay with monostable functioning

AUTOMATIC CLOSING

Permits the selection between the semiautomatic or automatic functio-
ning. By the semiautomatic functioning the command of START or PEDE-
STRIAN START opens the gate, when the opening is complete the gate
remains still until the successive command of opening, which will reclose
it. On the other hand, it stops automatically and remains in pause phase
for the set time (t.PAU), then it closes again through the set closing time.
no the automatic reclosing is not available, the gate is semiautomatic.
t.PAU the reclosing is available, the standstill time is set from 0 to 999.
IMPORTANT: If the automatic reclosing is not available, is necessary to
enable the start command in pause(menu St.PA)

COURTESY LIGHTS

Thanks to the connection "courtesy light" the
PD9 control unit enables the connection of the
courtesy lights (I.E. garden lights), which can
work automatically (lights on for the whole cycle)
or timed (lights on for a time adjustable from 0 to
999 seconds). The lights turn on with a START or
PEDESTRIAN START control. It is also possible to
control this connection using the code memorized
in the radio input tEL4, in this last case the con-

FLASHLIGHT IN PAUSE

This menu permits to activate or to disable the flashlight
during the pause time.
23