Advertisement
Available languages
Available languages
Symbol
Power tool designation
The power tool is designed for cutting straight-line
grooves in various materials (concrete, brick, stone,
etc�)�
The power tool is designed for right-handed users only�
Power tool components
1 Ventilation slots
2 Spindle lock
3 Reducer
4 Vacuum cleaner adapter
5 Roller
6 Axis of the roller
7 Protective casing (assembled)
8 Lock-on button
9 On / off switch
10 Handle
11 Additional handle
Meaning
Locked�
Unlocked�
Prohibited�
Attention� Important�
Double insulation / protec-
tion class�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Useful information�
Wear protective gloves�
During operation, remove
the accumulated dust�
Do not dispose of the power
tool in a domestic waste
container�
12 Wing screw of cover
13 Cover
14 Wing screw of pointer
15 Cutting depth scale
16 Base plate
17 Body
18 Diamond cutting disc *
19 Allen key *
20 Flange wrench *
21 Allen key with handle*
22 Break-out tool *
23 Nut
24 Pointer
25 Bolts of front cover
26 Front cover (assembled)
27 External flange
28 Spindle
29 Distance washer
30 Internal flange
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before carrying out any works on the power tool it
must be disconnected from the mains.
Do not draw up the fastening elements
too tight to avoid damaging the thread�
Additional handle (see fig. 1)
Always use the additional handle 11 when operating�
Fig� 1 shows the steps for mounting / dismounting an
additional handle 11�
Installation / replacement of the diamond cutting
discs, setting the width of the cut slot (see fig. 2-8)
Note: always replace the diamond cutting
discs in pairs. Do not use old and new
diamond cutting discs at the same time.
After installing the diamond cutting
discs, before starting work, perform a
test run: turn on the power tool and let
it work at idle for at least 30 seconds. It
is prohibited to use the diamond cutting discs with
a beat or causing increased vibration of the power
tool.
When used for a long time, the diamond
cutting discs can become very hot; remove
them having gloves put on your hands.
Complete disassembly (see fig. 2-4, 8)
Figures 2-4 show the process of complete
disassembly. In this case, the front cover 26 is
removed and full access to all parts and the space
inside the protective casing 7 is provided. This
allows thorough cleaning of all parts, as well as
monitoring their condition.
English
14
Advertisement
