Kogan 7 Series User Manual page 11

Water inlet connection
Connect the inlet hose supplied to the machine to a tap with a 3/4" thread.
Do not use any hoses previously used with another washing machine.
Installation should comply with local water authority and building regulations' requirements.
When there is an inlet valve at the back of the machine, it must be connected to a cold
water supply.
Washing preparation
1. Connect the inlet hoses and turn on the tap.
2. After making sure the power socket is grounded reliably, insert the power plug into
the power socket. Switch on at wall.
3. Position the drainage hose well (ie, laundry sink or drain).
How to use Washer
Before washing clothes for the first time, you must run a complete cycle without clothes.
1. Turn the program select knob to "Cotton" position.
2. Press "Start/Pause" button.
If there is any water leftover from quality control testing, this will drain the water.