Kogan 7 Series User Manual page 15

Notes:
' ' is for Standard Cotton program. Standard Cotton at 60°C and 40°C are suitable to
clean normally soiled cotton laundry and they are the most efficient programs in terms of
combined energy and water consumption for washing that type of cotton laundry; in
addition, the actual water temperature may differ from the declared cycle temperature.
The running time above is for the default programs, which is only for reference and it, May
different because of different laundries, weights and washing temperature. The "00" means
the temperature of water is normal. The default options of the programs are in boldface.
Clothes Preparation
•
Sort the laundry by colour and by care label. Most garments have a textile care
label in the collar or side seam.
•
Make sure all the pockets are empty. Foreign objects (such as nails, coins, paper
clips, etc.) can cause damage to other garments as well as the machine.
•
Close any zips, fasten hooks and toggles, etc, before washing (figure 1)
• Dark textiles often contain excess dye and should be washed separately several
times before being included in a mixed load. Always wash whites and coloureds
separately.
•
Badly soiled areas, stains etc. should be pre-treated with liquid detergent stain
removers etc (figure 2)
•
Turn over the clothes which pill easily and is with woollen surface before putting
them into the machine (figure 3).
Figure 1
Put clothes into washer
Unfold the laundry and load loosely into the drum. Mixing both
large and small items gives better wash results and also helps
distribute the load evenly during spinning. The most efficient use
of energy and water is achieved when a full load is washed.
However, do not overload as this causes creases and reduces
cleaning efficiency.
Note:
Make sure that no garments are caught between the door and the seal.
Figure 2 Figure 3