Suzuki MT50 Service & Parts Manual page 149

Fig. 9-17-4 Removing kick
return spring
B. Tips on in stalling
When fitting the kick starter shaft return
spring retainer and guide, pay attention to
their fitting direction.
Before installing the kick starter shaft return
spring, turn the shaft rightward all the way.
Insert one end of the return spring into the
hole on the crankcase and the other into the
hole on the shaft by twisting about half a
turn with pliers.
9 - 1 7 - 2. Gear shifting cam stopper and
gear shifting cam guide
The gear shifting cam stopper controls the
shifting cam position when gears are shifted.
The gear shifting cam guide keeps the cam
from moving in an axial direction and holds
it in place.
sta· r ter shaft
( See Fig. 9-17-1.)
Fig. 9-17-5 Removing kick starter shaft
circlip
9-17-6
Fig. Removing return spring
retainer
9-17-7
Fig. Installing kick starter shaft
return spring
(.)) S pring
1)�"'"'
@Washer
@Stopper
®Stopper bolt
@Guide
@ Lock washer
l'l Guide bolt
9-17-8
Fig. Gear shifting
and guide
"
�',.3 '
(� @
stopper
cam
47