Suzuki MT50 Service & Parts Manual page 190

PERIODICAL INSPECTIONCHART
The chart below indicates time when inspections, adjustments and maintenance are required based on the distance the motorcycle runs, that is first 1,000km
(750mi), and every 3,000 km (2,000mi), 6,000km (4,000mi) and 12,000km (8,000mi) thereafter.
motorcycle checked and serviced at your shop. See the appropriate section for instructions on making the inspection.
Distance (km)
Check operation, adjust
Oil pump
control lever adjusting marks
Spark plug
Clean
Gearbox oil Change
Throttle and Brake cables Adjust play
Adjust with throttle valve
Carburetor
screw and pilot air screw
Check contact point gap and
Magneto
ignition timing.
magneto nut.
Retighten cylinder and cylinder
Cylinder head and Cylinder
head nuts
Check and service electrolyte
Battery
solution
Fuel cock Clean fuel strainer
Drive chain
Adjust
Brakes
Adjust play
Air cleaner
Throttle grip
Retighten exhaust pipe clamp
Exhaust pipe and Muffler
and fitting screw
Check play
Steering stem
Retighten stem nuts
Bolts and Nuts
Retighten
Oil outlet
1,000 km Every 3,000 km
750 mi Every 2,000 mi
Check operation, adjust
control lever adjusting marks
Clean and adjust gap
Change
Adjust play
Adjust with throttle valve
screw and pilot air screw
Check contact point gap and
Retighten
ignition timing. Lubricate
contact breaker cam oi
Retighten cylinder and cylinder
head nuts
Check and service electrolyte
solution
Adjust and lubricate
Adjust play
Clean
Retighten exhaust pipe clamp
and fitting screw
According to the chart, advise users to make the
Every 6,000 km
Every 4,000 mi
Replace
Lubricate
felt
I
Remove carbon
Clean fuel strainer
Wash
Put grease in throttle grip
Remove carbon
Check play
Retighten stem nuts
Retighten
Clean outlet union filter
Every 12,000 km
Every 8,000 mi
Overhaul and clean
Replace contact point