Fig. 9-3-11 Unscrewing four carburetor
rubber cap screws
Removing·
carburetor cover
Remove the carburetor cover by loose
ning three fitting bolts.
Fig. 9-3-13 Loosening carburetor clip bolt
Removing mixing chamber top
Detach the carburetor from the inlet
pipe of the crankcase and take out the
mixing chamber top
counterclockwise.
by unscrewing
Unscrewing carburetor rubber cap screw
Unscrew the four carburetor rubber
cap screw
Fig. 9-3-12 Removing carburetor cover
Loosening carburetor clip bolt
Loosen the carburetor clip bolt with
the
flat
head screw driver inserted
from
the
hole
Fig. 9-3-14 Removing mixing chamber top
on the right
cover.
25