VersaLogic Komodo VL-EPICs-36 Reference Manual page 15

OS Installation
1. Install Memory

Insert the DDR3 DRAM module into the SO-DIMM socket J21 on the bottom of the
board and latch it into place.
2. Attach Cables and Peripherals

Plug the LVDS adapter cable VL-CBR-2010, 2011, or 2012 into socket J20 on the
bottom of the board. Attach the adapter cable to the LVDS display.

Plug a USB keyboard and USB mouse into any Type A USB connector on the board
(J11, J12, J16, or J17).

Plug the SATA hard drive data cable VL-CBR-0701 into a SATA socket, J10 or J15.
Attach a SATA hard drive to the cable.
VL-EPICs-36 Reference Manual
CD-ROM ROM Drive
USB Type A
VL-EPICs-36
KOMODO
LVDS
Figure 2. Typical Start-up Configuration
USB CD-
USB Keyboard
and USB Mouse
USB Type A
J12 J17
J11 J16
VL-CBR-0701
J10 J15
VL-CBR-0401
VL-CBR-2022
J14
J20
VL-CBR-2010, 2011, or 2012
Configuration and Setup
SATA
Hard Drive
ATX
Power Supply
9