Turning Off The Sx90 - Simrad SX90 Quick Start Manual

Turning off the SX90

Select on the top bar to turn off the SX90. You can also use the
Power Off
the Operating Panel. You must never turn off the SX90 by means of the on/off switch on
the Processor Unit.
Context
When you do not use the SX90, turn off the display and the Processor Unit.
Procedure
1 Select
Power Off
In the
Power Off
• turns off the Processor Unit and the Transceiver Unit.
Power Off
•
Exit to Operation System
Transceiver Unit.
• Both functions will also retract the transducer.
or:
2 On the Operating Panel, press
In the
Power Off
3 Wait while the SX90 program closes and theTransceiver Unit is turned
off.
4 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
Related topics
Starting normal operation, page 18
386619/C
on the top bar.
dialog box, select
Power off
closes the SX90 program, and turns off the
, and keep it depressed for a few seconds.
Power
dialog box, select
Power off
or
Exit to Operating System
or
Exit to Operating System
Getting started
button on
Power
.
.
35