Simrad SX90 Quick Start Manual page 69

•
Place Ruler
Place the cursor over the first echo. Right-click to open the shortcut menu, then select
. The ruler starts wherever you place the cursor, and ends when you release
Place Ruler
the button. The length and relative bearing of the ruler is displayed next to it. Once a
ruler has been established you can not make changes to it. You can place as many rulers
as you like in the view.
Select
Delete Ruler
rulers from the view.
•
Delete Ruler
Use to remove one selected ruler from the view. Place the cursor on the
Delete Ruler
line, right-click when the cursor turns into a finger, then select
shortcut menu.
•
Delete All Rulers
allows you to delete all the rulers in the current view.
Delete All Rulers
•
Ship To Centre
Select
Ship to Centre
function is typically used when you have used the
the ship symbol away from the centre of the view.
•
Reset Ship Centre
This function is useful when you need to "reset" the view after using the
or functions. Right-click and
Centre Zoom
to the centre of the presentation.
•
Set New Ship Centre
Place the cursor anywhere in the view, right-click and select
function moves the vessel symbol to the selected position.
•
Zoom
Place the cursor anywhere in the view, right-click and select
is provided. Select
•
Erase Echoes
Select
Erase Echoes
386619/C
or on the shortcut menu to delete the one or several
Delete All Rulers
to move the own ship symbol back to the centre of the view. This
one more time to restore the original view.
Zoom
to "refresh" the view by deleting all the current echoes.
Delete Ruler
Set New Ship Centre
to move the vessel symbol
Reset Ship Centre
Set New Ship Centre
Zoom
Menu system
from the
function to move
Set New Ship
. The
. Only one zoom level
67