Simrad SX90 Quick Start Manual page 65

Cosmetics menu
Use the functions on the
presentation on or off.
How to open
Select to open the menu.
Cosmetics
is located on the
Cosmetics
is not available for the Inspection views.
Description
The majority of the choices provided by this menu are self-explanatory. Only specific
functions of particular interest are explained with brief descriptions.
The choices in the this menu depends on which view in the SX90 presentation that is
currently "active". The menu may therefore change from one view to another. The screen
capture may not show you all the menu choices.
Note
Before you can change the settings related to a view, you must click inside the view to
activate it. The changes you make are by default only valid for the active view. Several of
the functions offer
Apply to All
the views in the current presentation mode.
•
Range Rings
This function enables range rings to be shown on the SX90 presentation. Range rings are
a set of concentric circles labelled by distance from the vessel position. The range rings
are shown as dotted lines. Each ring has a range read-out on the left hand side. Use this
function to toggle the range rings On or Off.
•
Variable Range Ring
An adjustable range ring can be added to the Horizontal and Vertical views. The ring is
shown as a dotted circle with its centre on the vessel symbol. The current range is shown
next to the circle. To change the range, left-click on the circle and drag to requested
diameter. You can use
can be used for any type of distance measurement relative to the vessel.
• (Variable Range Ring Range)
VRR Range
You can use
VRR Range
386619/C
menu to turn "cosmetic" elements in the SX90
Cosmetics
menu. The function
Display
. If you select
Apply to All
to manually define a range. The variable range ring
VRR Range
to manually define a range for the variable range ring.
Menu system
your setting is applied to all
63