Saving Single Or Sequential Screen Captures - Simrad SX90 Quick Start Manual

Saving single or sequential screen captures

While using the SX90 you may wish to make a screen capture to save an instantaneous copy
of the current presentation. Each screen capture you make is saved in
Processor Unit hard disk.
Context
You can choose either a single screen capture or a sequence with multiple screen captures.
Each screen capture you make is saved in
file name reflects the current date and time.
on the top bar allows you to make a copy of the current SX90 presentation.
Screen Capture
You can also use the
Procedure
Choosing screen capture mode:
1 Open the
Setup
2 Select
Screen Captures
a Select screen capture mode.
• Single: In Single mode one screen capture is every time you select
Capture
• Sequence: In Sequence mode a new screen capture is created for every ping.
b Select
Close
Saving a single screen capture:
3 Observe
Screen Capture
4 Select
Screen Capture
Every time you do this a new image file is created.
You can also use the
Saving a sequence of screen captures:
386619/C
button on the Operating Panel.
Screen Capture
menu.
.
on the top bar.
to save the chosen settings and close the dialog box.
on the top bar.
to make a copy of the current SX90 presentation.
button on the Operating Panel.
Screen Capture
format on the Processor Unit hard disk. The
.jpg
Getting started
format on the
.jpg
Screen
39