VPC i2 MICRO iCON User Manual page 8

i2 MICRO iCON USER MANUAL
INSTALLATION INSTRUCTIONS (CONT'D)
5. Secure the cover to the i2 Micro iCon ITA/module by tightening
the four Phillips head screws (Figure D) in a criss cross pattern
using a Phillips head screwdriver. Torque to 2 in-lbs [0.23 Nm].
6. Install the engagement knob and tighten the engagement knob
screw using a flat head screwdriver (Figure E). Torque to 4 in-lbs
[0.46 Nm].
7. Secure the cable bundle using the strain relief bar. (See page 8 of
this user manual for more information.)
7
ITA COVER INSTALLATION
PART # 410 130 XXX
For more information visit vpc.com
Figure D. Secure cover to ITA/module.
Figure E. Reinstall engagement knob.
VPC
RETURN TO INDEX
07/23/21