Advertisement
i2 MICRO iCON USER MANUAL
INSTALLATION INSTRUCTIONS
1.
To attach the i2 Micro iCon ITA protective cover to the ITA you
may discard the mounting screw that is supplied with the cover.
2.
Use the eyelet coupling on the cover's chain lanyard to attach
the cover to the ITA. Place one of the 4-40 x 1.5" screws through
the eyelet and insert into the ITA.
3.
Follow the instructions for "Cable Clamp Installation" on page
8 of this User Manual to properly tighten and install the cable
clamp.
4.
When properly installed the eyelet should be securely mounted
between the screw head and ITA housing.(Figure A).
12
ITA PROTECTIVE COVER INSTALLATION
PART # 410 113 208
For more information visit vpc.com
Figure A.
VPC
RETURN TO INDEX
07/23/21
Advertisement
Need help?
Do you have a question about the i2 MICRO iCON and is the answer not in the manual?