Table of Contents
Advertisement
Quick Links
Note: Any printed or downloaded User Manuals or Procedure Sheets may not reflect the most current revisions.
The information contained in this manual is subject to change. For the most current information visit vpc.com.
9050/9050TR USER MANUAL
INDEX
(CLICK TO NAVIGATE TO PAGE)
PAGE
1
9050 RECEIVER RACK MOUNT INSTALLATION
2
LOCATING & MOUNTING 9050TR SLIDE KIT
3
9050TR SLIDE KIT INSTALLATION
4
LOCATING & MOUNTING 9050 SLIDE KIT
5
9050 SLIDE KIT INSTALLATION
6
SLIDE MOUNT NOTATION REGARDING U HEIGHT
7
INSTRUMENT BRACKET INSTALLATION
9
KEYBORD TRAY KIT DIAGRAM
10
KEYBORD TRAY KIT INSTALLATION
11
CABLE TRAY INSTALLATION
12
9050TR PLATFORM REMOVAL INSTRUCTIONS
13
9050TR PLATFORM INSTALLATION
14
9050TR HANDLE REMOVAL & REPOSITIONING
15
MICROSWITCH REMOVAL & INSTALLATION
16
ITA ENCLOSURE OPTIONS
17
ITA AND RECEIVER ENGAGEMENT
18
TROUBLESHOOTING
19
PRECAUTIONARY NOTES
03/31/21
Advertisement
Table of Contents
Related Manuals for VPC 9050
Summary of Contents for VPC 9050
- Page 1 ITA AND RECEIVER ENGAGEMENT TROUBLESHOOTING PRECAUTIONARY NOTES Note: Any printed or downloaded User Manuals or Procedure Sheets may not reflect the most current revisions. The information contained in this manual is subject to change. For the most current information visit vpc.com. 03/31/21...
-
Page 2: Rack Mount Installation
RECEIVER, 9050TR, 50 MODULE, WITH 20” PLATFORM • PART # 310 104 369 RECEIVER, 9050, 50 MODULE, DUAL DISCRETE WIRING TIERS, EMI GASKET • PART # 310 104 429 28" SLIDE KIT (FITS 26"– 30" DEEP RACKS [660.4 – 762]) • PART # 310 113 451 30"... - Page 3 RECEIVER, 9050TR, 50 MODULE, WITH 20" PLATFORM • PART # 310 104 369 RECEIVER, 9050, 50 MODULE, WITH SLIDE MOUNTING • PART # 310 104 402 28" SLIDE KIT (FITS 26"– 30" DEEP RACKS [660.4 – 762]) • PART # 310 113 451 28"...
- Page 4 SLIDE MOUNT NOTATION REGARDING U HEIGHT RECEIVER, 9050, 50 MODULE, WITH SLIDE MOUNTING • PART # 310 104 402 PART # 310 104 369 • PART # 310 104 402 • PART # 310 104 483 • PART # 310 104 441 28"...
- Page 5 SCREWS. Figure B. The slots on the instrument brackets are designed to accept a strap should you want to secure your chassis. RETURN TO INDEX RETURN TO INDEX For more information visit vpc.com 04/09/21 04/09/21 For more information visit vpc.com...
- Page 6 Figure D. Floating, self-locking fasteners in the keyboard mounting brackets prevent the screws from backing out. You will notice the snug fit when tightening the screws. Dimensions shown: [millimeters] RETURN TO INDEX RETURN TO INDEX inches For more information visit vpc.com 04/09/21 04/09/21 For more information visit vpc.com...
-
Page 7: Platform Removal
Figure B. The six mounting screws must be removed from the receiver before the platform can be removed. Tighten the slide mounting screws. RETURN TO INDEX RETURN TO INDEX For more information visit vpc.com 04/09/21 04/09/21 For more information visit vpc.com... -
Page 8: Platform Installation
Replace the screw and handle washer into the cavity on right side of the receiver (Figure C). Figure B. Remove handle from standard right side. Figure C. Install handle on left side. Dimensions shown: [millimeters] RETURN TO INDEX RETURN TO INDEX inches For more information visit vpc.com 04/09/21 04/09/21 For more information visit vpc.com... - Page 9 ENCLOSURE, 50 MODULE, L-SHAPED • PART # 410 113 214 A microswitch is used in the 90 Series/VXI receivers ITA, 9050, 50 MODULE, VXI AND DISCRETE WIRING, DOUBLE TIER • PART # 410 104 538 to determine the presence (or absence) of an ITA engaged in the system.
-
Page 10: Troubleshooting
• Remove and inspect the ITA for alignment, respective mating receiver and ITA module pair are adjacent. VPC recommends that Pin 1 always be positioned to the left in the receiver and ITA frames. All ITA • Check for foreign objects/tools. -
Page 11: Precautionary Notes
The foremost precautionary step that needs to be taken is to protect the interface system from damage caused by people (bumping into the receiver/ ITA assembly with a box, chair or electronic equipment for example). To prevent this, VPC recommends engaging either the ITA or the receiver protective cover to the receiver when not in use.
Need help?
Do you have a question about the 9050 and is the answer not in the manual?
Questions and answers