Interface compatible with bmw e65 professional navigation systems with old idrive (e65) and menu button, without factory rear-seat entertainment (15 pages)
V.logic camera interface compatible with the e-series bmw and mini with navigation system or radio and 6.5” or 8.8” monitor with 4pin hsd lvds connector (20 pages)
Tv-free video-in-motion interface for audi mmi 2g; audi mmi 3g; audi mmi 3g+; vw rns850 (4 pages)
Summary of Contents for Caraudio-Systems usbLOGiC USB-E65-TV
Page 1
usbLOGiC USB-AV-Player USB-E65-TV compatible with BMW E65 Professional navigation systems with 8.8” monitor Vehicles with factory TV-tuner port (Factory TV-tuner must be uninstalled) Product features • USB-port for media up to 2 TB (2000GB) • supports FAT32 and NTFS formatted media •...
• video-in-motion Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-436 1.4. Setting the dip switches of the USB-box USBC-M536 1.4.1. Automatic switching to rear-view camera 1.4.2.
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.
1.2. Check compatibility of vehicle and accessories Requirements Vehicle 7series (E65/E66) Navigation Navigation system Professional E65 (older 1/2-button iDrive or CIC (newer 8-button iDrive) with 8.8” monitor Limitations factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed. factory DVD-changer After-market rear-view camera cannot be connected to or factory nightvision...
1.4.1. Automatic switching to rear-view camera Dip switches If an after-market rear-view camera shall be connected or a factory of USB-box rear-view camera is connected, in order for the usbLOGiC to automatically switch to its camera input, when reverse is engaged set dip2 = ON (up).
2.1. Installation of CAN-box TV-436 The CAN interface is connected to the backside of the OEM screen. Remove 3 TORX screws at the OEM screen. Remove cover grill (only plugged). Place soft towel beneath the navigation monitor to avoid scratches Flip down the board monitor.
Page 7
Remove 12-pin insert from black vehicle harness connector. Insert 12-pin insert into black connector of the CAN interface harness TV-BMW65. Insert the completed black connector into CAN interface harness TV-BMW65. Connect 12-pin insert from CAN interface harness TV-BMW65 into black connector from vehicle harness.
2.2. Installation of USB-box USBC-M536 The fibre optical interface installation is made at the navigation computer, which is located at the left side in the trunk behind a cover and has to be removed. The factory TV-tuner must be uninstalled. Remove the factory optical leads of the factory TV-tuner port (blue female connector) and connect it to the black male MOST®-connector enclosed to...
2.3. USB and optional IR-remote control set Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USB- box USBC-M536 and install the USBC-EXT socket in a well accessible location, e.g. the glove-box. Make sure there is enough space to load USB-media. Installation socket for the connection of USB-media.
2.4.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table shows the pre- programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device.
2.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to the female RCA connector R-CAM IN of USB-box USBC-M536. The green wire of harness C2C-BMW02 can be used as +12V power (max 1A) supply for the rear-view camera. Note: Automatic switching to the camera-input when reverse gear is engaged works only in usbLOGiC mode.
2.4.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of USB-box USBC-M536. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors.
3. Operation 3.1. Activation of the video-in-motion function Tthe video-in-motion function is permanently active without disturbing the navigation performance. 3.2. Selecting the usbLOGiC as current AV-source In the vehicle’s main menu, select Infotainment and then TV by iDrive to choose the usbLOGiC as current AV-source.
3.5. Button assignment table iDrive The button assignment table shows which functions of usbLOGiC and additionally connected devices can be executed by iDrive. Once USB or AV-input mode are activated the iDrive action in the left column will execute the function described in the corresponding device column.
Weight 312g Measurements (box only) B x H x T 135 x 30 x 105 mm 5. Connections (USB-box) 6. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...
Need help?
Do you have a question about the usbLOGiC USB-E65-TV and is the answer not in the manual?
Questions and answers