Table of Contents
Advertisement
2.3.
Antennas and optional IR-remote control set
Mount antennas ANT-12 and connect them to the female f-plug connectors on front
of tuner-box DVBC-M436.
We strongly recommend to first test the reception quality of the chosen mounting
position of the antennas before final installation! See "Appendix C – Antenna
positioning" for additional information.
The DVB-IRSET consists of the external C3C-SENSOR IR-sensor and the DVBC-RC
IR-remote control and can be used to control the dvbLOGiC's internal DVB-T tuner
functions additionally to the control through the navigations buttons. Connect the
C3C-SENSOR to the female black/red/blue 3pin AMP connector of harness
C3C-AVIR and locate the sensor in an accessible place.
Note: To use the teletext function of the dvbLOGiC's internal DVB-T tuner, the DVB-
IRSET is necessary to enter the page numbers.
2.4.
Connecting peripheral devices
It is possible to connect an after-market AV-source, after-market rear-view camera and rear-
seat-entertainment to the dvbLOGiC Tuner. Also factory nightvision, factory DVD-changer or
factory rear-view camera must be connected to the dvbLOGiC-Tuner.
Before final installation of the peripheral devices, we recommend to test-run the
dvbLOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or
peripheral devices as soon as possible.
Version 13.02.2013
DVB-E65-TV
Advertisement
Table of Contents
