SNBC BTP-P33 User Manual page 6

General Safety Information
Before installing and using the printer, please read the following items
carefully.
1. Safety instructions
Warning: Don't touch the tear bar of printer..
Warning:The print head is a thermal element and it is at high
temperature during printing or just after operation, therefore please do
not touch it and its peripherals for safety reasons.
Warning: The thermal head is an ESD-sensitive device. To prevent
damage, do not touch either its printing part or connecting parts.
2. Caution
1) Keep the printer away from water source, and avoid direct exposure to
sun light, strong light and heat of fire.
2) Do not use or store the printer in a place exposed to high temperature,
moisture and serious pollution.
3) Do not place the printer on a place exposed to vibration or impact.
4) No dew condensation is allowed to the printer. In case of such
condensation, do not turn on the power until it has completely
evaporated.
5) Connect the charger to an appropriate grounding outlet. Avoid sharing
a single electrical with large power motors and other devices that may
cause the fluctuation in voltage.
6) Take out the battery of printer when the printer is not used for a long
time.
- 5 -
BTP-P33 User's Manual