Save & Exit - Vecow MIG-2000 User Manual

4.8 Save & Exit
Figure 4-8 : Save & Exit
Save & Exit Setup
Press <Enter> on this item and select Yes. This saves the changes to the
CMOS and exits the BIOS Setup program. Select No or press <Esc> to return
to the BIOS Setup Main Menu.
Exit Without Saving
Press <Enter> on this item and select Yes. This exits the BIOS Setup without
saving the changes made in BIOS Setup to the CMOS. Select No or press
<Esc> to return to the BIOS Setup Main Menu.
Load Optimized Defaults
Press <Enter> on this item and select Yes to load the optimal BIOS default
settings. The BIOS defaults settings help the system to operate in optimum
state. Always load the Optimized defaults after updating the BIOS or after
clearing the CMOS values.
Boot Override
Allows you to select a device to boot immediately. Press <Enter> on the device
you select and select Yes to confirm. Your system will restart automatically and
boot from that device.
Save Profiles
This function allows you to save the current BIOS settings to a profile. You
can create up to 8 profiles and save as Setup Profile 1~ Setup Profile 8. Press
<Enter> to complete. Or you can select Select File in HDD/FDD/USB to save
the profile to your storage device.
Load Profiles
If your system becomes unstable and you have loaded the BIOS default
settings, you can use this function to load the BIOS settings from a profile
created before, without the hassles of reconfiguring the BIOS settings. First
select the profile you wish to load and then press <Enter> to complete. You can
select Select File in HDD/FDD/USB to input the profile previously created from
your storage device or load the profile automatically created by the BIOS, such
as reverting the BIOS settings to the last settings that worked properly (last
known good record).
©Vecow MIG-2000 User Manual BIOS SETUP 52