Power - Vecow MIG-2000 User Manual

4.7 Power

Platform Power Management
Enables or disables the Active State Power Management function (ASPM).
(Default : Disabled)
PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU
PEG bus. This item is configurable only when Platform Power Management is
set to Enabled. (Default : Disabled)
PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's
PCI Express bus. This item is configurable only when Platform Power
Management is set to Enabled. (Default : Disabled)
DMI ASPM
Allows you to configure the ASPM mode for both CPU side and Chipset side of
the DMI link. This item is configurable only when Platform Power Management
is set to Enabled. (Default : Disabled)
AC BACK
Determines the state of the system after the return of power from an AC power loss.
Always Off The system stays off upon the return of the AC power. (Default)
Always On The system is turned on upon the return of the AC power.
Memory
Watch Dog
Enables or disables Watch Dog function. (Default : Disabled)
RC6 (Render Standby)
Allows you to determine whether to let the onboard graphics enter standby
mode to decrease power consumption. (Default : Enabled)
©Vecow MIG-2000 User Manual
The system returns to its last known awake state upon the return
of the AC power.
Figure 4-7 : Power
BIOS SETUP 51