Type Ii And Type Iii Camera Mounting - HIKVISION 26 series Quick Start Manual

Network Bullet Camera·Quick Start Guide
5. Adjust zoom and focus (refer to Section 2.4).
6. (Optional) Install the water-proof jacket for network interface.
Refer to Section 2.5 for detailed installation procedures.

2.3 Type II and Type III Camera Mounting

Before you start:
Camera of these types is equipped with a bracket. It can be mounted
to a wall or a ceiling directly and can also be mounted with a
junction box or a gang box.
2.3.1 Direct Mounting
Steps:
1. Attach the drill template (supplied) to the wall or the ceiling
where the camera is to be mounted.
2. Drill screw holes in the wall or ceiling according to the Hole 1 on
the drill template.
Figure 2-11
2
Ceiling Mounting
1
2
1:Screw Hole for
Bracket
1
2
Drilling Holes in the Wall/Ceiling
25
1
2
2:Screw Hole for
Mounting Base
1