Hard Disk Controllers - Inspur i24 Server Acceptance Manual

Objective
Prerequisites
Procedure
Expected result
Description

1.1.5 Hard Disk Controllers

Table 1- 7 Hard Disk Controllers
Item
Objective
To verify that the system detects hardware properly.
The structure of the mainboard and hard disk backplane is
intact.
1. Power on the system, during the system startup, press
DEL to enter the BIOS setup screen.
2. View the CPU model and quantity.
3. View the total memory capacity.
4. Choose Advanced > PXE Configuration, and view the
MAC addresses of the network ports.
5. View the system serial number (S/N).
6. View the basic input/output system (BIOS) version.
1. The BIOS SETUP screen is displayed.
2. The CPU model and quantity are the same as the actual
configurations.
3. The total memory capacity is consistent with actual
configurations.
4. Choose Advanced > PXE Configuration, the MAC
addresses of the network ports are displayed.
5. The System S/N parameter is specified.
6. The BIOS version is displayed.
7. No abnormal noise is heard during the startup.
None
Content
To verify that the RAID controller card operates properly.（LSI
Inspur proprietary and confidential information
Copyright © Inspur Electronic Information Industry Co., Ltd.
8