ZKTeco BGM500 Series User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Access Controllers
  5. BGM500 Series
  6. User manual
ZKTeco BGM500 Series User Manual

ZKTeco BGM500 Series User Manual

Barrier gate
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BGM500 Series Barrier Gate
User Manual
BGM500 Series Barrier Gate
Date: February 2023
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For further details, please visit our Company's website
www.zkteco.com.
P a g e
| 1
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
User Manual

Advertisement

Table of Contents
loading

Related Manuals for ZKTeco BGM500 Series

Summary of Contents for ZKTeco BGM500 Series

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
  • Page 2 Copyright © 2022 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
  • Page 3 BGM500 Series Barrier Gate User Manual ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far- range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.

  • Page 5: Table Of Contents

    ELAY FOR UTOMATIC LOSING AFTER PENING THE BOOM ARM ADJUSTMENTS ..................... 23 ........................... 23 IMENSIONS ORIZONTAL AND ERTICAL NGLE DJUSTMENT OF ECHANICAL DJUSTMENT ................. 25 IRECTION NTERCHANGE OF THE P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 6 BGM500 Series Barrier Gate User Manual ......................26 PRING DJUSTMENT PRODUCT PACKING LIST ..................... 26 TROUBLESHOOTING ....................27 P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 7: Overview

    BGM500 Series Barrier Gate User Manual Overview BGM500 series parking barrier adopts streamlined appearance style design, built-in LED indicator; Integrated brushless DC motor gear box all-in-one transmission mechanism and intelligent ZKBarrier mainboard, MCBF can reach 3 million maintenance free. Apply to schools, communities, factories, office buildings and so on.

  • Page 8: Specifications

    When the power is on, do not make any changes to the wire connections inside. The GND should be connected to the cabinet for secure protection. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 9: Cable Embedding

    Pull the vice boom out from the main boom and install them with the two screws, as shown in Figure 1. Install the boom to the chassis, as shown in Figure 2. Figure 1 Connect the main boom with the vice together by 2 screws P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 10: Installation Of The Folding Boom

    Start the power supply and observe the running state of the machine. If the boom arm open shaking, it is then necessary to loosen the spring and slow down the speed P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 11: Installation Of The Fence Boom Arm

    If the length of the barrier boom is cut and adjusted, the tightness of the spring and the position of the hanging hole must to adjusted accordingly in order to avoid the abnormal condition of the machine that cannot drop the boom. P a g e | 10 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 12: Definition Of Left And Right Directions

    Make sure the terminals are securely fastened and the wiring is secure. The wiring diagram of the control panel is explained as follows: P a g e | 11 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 13: Connection With Lpr Camera

    Connection with LPR Camera Connection with UHF Controller (Note: The reader 1 and 2 of Inbio260 Controller corresponds to LOCK1, Reader 3 and 4 corresponds to LOCK2) P a g e | 12 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 14: Connection With Loop Detector

    BGM500 Series Barrier Gate User Manual Connection with Loop Detector Anti-smash and Auto-close function: P a g e | 13 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 15: Connection With Vr10 Radar Sensor

    5 to 6 turns 6m to 10m 4 to 5 turns 10m to 25m 3 turns 2 turns Connection with VR10 Radar Sensor Anti-smash and Auto-close function P a g e | 14 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 16: Connection With Infrared/Photocell Detector

    BGM500 Series Barrier Gate User Manual Connection with Infrared/Photocell Detector Anti-smash function Anti-smash and Auto-close function P a g e | 15 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 17: Functional Parameter Settings

    Menu/Save: Menu options/Confirm and Save Stop/ : Stop the boom arm /button to switch the menu item and the value item ▼ Open/+: Increase parameter/value Close/-: Decrease parameter/value P a g e | 16 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 18: Operating Procedure

    01E102: Opening position 01EXXX 01E000 01E202: Closing position 01E502: Opening 01E602: Closing 01E702: In the pause 01E003: Number of boom openings  01E004: Version Information  P a g e | 17 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 19 It can be set between 20 and 100, the default value is 40. P a g e | 18 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 20  14E001: Reset  14EXXX 14E000 Select [14E001] will restore the default factory setting. (Note: The function does not clear Core Component Position and Core Component Polarity.) P a g e | 19 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 21  19E002: 5 to 6m  Please set the parameters according to the boom arm length. Core Component Polarity 20EXXX 20E000: Forward 20E000  20E001: Reverse  P a g e | 20 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 22: Error Code

    EL0002 Power-on Self-test failure, Hall limit detection error. EL0004 Run Timeout. EL0008 Clutch Locked. EL016 The code disk detection failed. EL032 Electric Motor Shaft Lock Protection failure. P a g e | 21 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 23: Remote Control Pairing And Unpairing

    Finally, press [Menu/save] to exit the menu. For example, if it is set to "11E007", the device will automatically close after 7 seconds after opening the barrier gate. P a g e | 22 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 24: Boom Arm Adjustments

    The boom arm is in this position horizontally. If the boom arm is not level or inclined at this time, unscrew the two rocker (rocker-arm) screws, turn the boom arm to the level, and tighten the screws. P a g e | 23 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 25 This is the boom arm's vertical position. If the boom arm is not in the vertical position and is inclined, unscrew the two screws on the rocker (rocker-arm), rotate the boom arm to the vertical, and tighten the screws. P a g e | 24 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 26: Direction Interchange Of The Boom Arm

    Component Position on the motherboard, such as changing from L to R, the value of this parameter should be set from 1 to 0, or set the direction of the movement on the app. P a g e | 25 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 27 Product Packing List Material Quantity User manual Chassis Explosion Screw M12X140 Boom pressure plate Chassis pressure plate Wireless remote Barrier boom hexagon bolt M10X70 Barrier boom Machine P a g e | 26 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 28 3. Detector damage and then confirm the number of turns install 3. Replace new loop detector P a g e | 27 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 29 1. Motor rotor bearing is 1. Replace new motor Abnormal sound is heard being damaged 2. Replace the new when the motor is running 2. Operating handle broken operating handle P a g e | 28 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 30 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.

This manual is also suitable for:

Bgm530 lBgm545 lBgm560 lBgm545 l-ledBgm545 l-90Bgm545 l-f ... Show all

Table of Contents