Kurzweil PC4 SE Musician's Manual page 86

Multi Mode
Save User Multis
To change the ID number, use the ALPHA WHEEL, or use the keypad function of the
CATEGORY buttons to type an ID number (4096 to 8191) followed by pressing the
ENTER button. If you select an ID number that is already used by another Multi, the
bottom of display will show a message to warn that you are going to replace a Multi.
Naming a User Multi
In the Save Dialog, you can name a Multi by using the Multi Name Page.
Use the CHANNEL/PAGE buttons to select the Multi Name Page.
The display shows the current Multi name. Multi names can total 16 characters in length.
Use the NAVIGATION Left/Right buttons to move the cursor to each character.
Change the current character by using the ALPHA WHEEL, or use the keypad function of
the CATEGORY buttons to type a character.
Use the NAVIGATION Up/Down buttons to set a character to upper or lower case.
To insert a space before the selected character, press the BANK + button. The selected
character and all characters to the right will move one space to the right.
To delete the selected character, press the BANK - button. All the characters to the right of
the selected character will move one space to the left.
After naming the Multi, press the SAVE button to return to the Multi Save Page. On the
Multi Save Page, press the SAVE button again to save the Multi as a User Multi.
4-12