Kurzweil PC4 SE Musician's Manual page 54

Common Page KB3 Parameters
The following parameters appear on the Common page for KB3 Organ programs.
Leakage
This parameter controls the level of the simulated crosstalk and signal "bleed" of adjacent
tone wheels in the model. This is provided to help "dirty up" the sound to make it a bit more
realistic. A setting of -96 dB gives the purest tones; other values add more simulated leakage.
This level is scaled by the drawbar levels, as well as the expression pedal level.
LeakMode
This parameter selects between different leakage models, determining which leakage
harmonics are emphasized. TypeA provides an overall tone wheel leakage, with all tone
wheels leaking a small amount. TypeX, TypeY, TypeZ, and TypeR emulate different degrees
of drawbar leakage, where the leakage components correspond to the nine drawbars, instead
of all the tone wheels.
Chorus/Vib On/Off
Use this parameter to turn Chorus or Vibrato On or Off. This is the same as setting the
Chorus/Vibrato On/Off parameter on the Parameters page to 0 or 127. Use the Chorus/Vib
Cntrl parameter to select between Chorus or Vibrato.
Chorus/Vib Cntrl
Use this parameter to select Chorus or Vibrato, and select from 3 depths for each effect. This
is an easy way to select between the six possible Chorus or Vibrato settings by adjusting a
single parameter. This parameter functions the same as setting the Chorus/Vibrato Depth
parameter on the Parameters page to 0, 64 or 127, and setting the Chorus/Vibrato Select
parameter on the Parameters page to 0 or 127.
Program Edit Mode
Common Page
3-11