Kurzweil PC4 SE Musician's Manual page 103

Multi Edit Mode
Arpeggiator, CC Seq and Riff Page
CC Sequencer
The CC Sequencer parameters set whether the CC Sequencer is On or Off for the Program
in each Zone.
CC Sequencer On/Off can also be controlled in each Zone by the front panel CC SEQ
button. In each Multi, the CC SEQ button must be assigned for the desired Zones on the
Multi Edit Controls page. Set Controller to CC Seq, then select Destination 148 (CC Seq
On/Off) with On Value 127 and Off Value 0.
CC Sequencer On/Off can also be controlled with other controllers on the Multi Edit
Controls page by using Destination 148 (CC Seq On/Off).
Edit CC Sequencer Settings
To edit the CC Sequencer settings, select the CC Sequencer parameter for the desired Zone,
set the parameter to On, then press the EDIT button to view the CC Sequencer page.
The CC Sequencer in Multi Mode is very similar to the Program Mode CC Sequencer. See
MIDI CC Step Sequencer Page on page 3-27 of the Program Edit Mode Chapter for a full
description of each CC Sequencer parameter.
In Multi Mode, the CC Sequencer works the same as in Program Mode, except there is one
CC Sequencer per Zone. The CC Sequencer in each Zone can each have different settings,
and they can be played at the same time.
5-15