Filter Defines /Ip Filter Defines - ADTRAN Express L768 User Manual

Chapter 3: Terminal Menu Operation and Structure

Filter Defines /IP Filter Defines

Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or bridged. Up
to 32 IP defines can be specified.
Name
IP Src
Src Mask
IP Dest
Dest Mask
Src Port
Src Port Cmpr
Dst Port
Dst Port Cmpr
Proto
Proto Cmpr
TCP Est
46
Identifies the filter entry
IP address compared to the source address.
(dotted decimal format)
Bits which are used in the source comparison.
(dotted decimal format)
IP address compared to the destination address.
(dotted decimal format)
Bits which are used in the destination
comparison. (dotted decimal format)
IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the source port is not compared
IP destination port number used for
comparison Range: 0 to 65535. (decimal format)
Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the destination port is not
compared
Protocol used for comparison. Range: 0 to 255.
(decimal format)
Type of comparison that is performed
= - means protocols equal to
not = - means protocols not equal to
> - means protocols greater than
< - means protocols less than
None - means the protocol is not compared
Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags
Express L768/L1.5 User Manual 61202192L1-1