Table of Contents
Advertisement
Chapter 3: Terminal Menu Operation and Structure
IPX Servers/Hops - Number of routers that must go through to get to
server. Ranges from 0-15 or 16 for infinite.
IPX Servers/TTL - Seconds until address is removed from table.
Value of 999 means server is static.
Status/WAN Stats
Read security: 5
This menu contains generic WAN statistics on HDLC hardware port.
HDLC Port
Tx Bytes - total number of raw bytes sent out HDLC port 1
Rx Bytes - total number of raw bytes received in HDLC port 1
Rx CRCs - total number of CRC errors detected on HDLC port 1
Clear Counts - When activated, clears all WAN stat counts
Status/LAN Stats
Read security: 5
This menu contains statistics for the Ethernet port.
Tx Packets - Packets transmitted out the Ethernet port
Rx Packets - Packets received from the Ethernet port
Tx Errors - Total transmit errors encountered on Ethernet port
Single Collisions - total single collisions before successful
transmission
Multiple Collisions - total multiple collisions before successful
transmission
Excessive Collisions - total collisions that resulted in packet being
dropped
Deferred Transmissions - total packets deferred due to collisions
Carrier Sense Errors - total carrier sense errors encountered (no
link integrity)
Rx Errors - Total packets received in error and dropped
CRCs - total packets detected with CRC errors
Giants - total packets received that were greater than 1518 bytes
Runts - total packets received that were less than 64 bytes
Rx Collisions - total collision occurred during reception
Clear Counts - When activated, clears all LAN Stat counts.
76
Express L768/L1.5 User Manual
61202192L1-1
Advertisement
Table of Contents
