Table of Contents
Advertisement
Chapter 3: Terminal Menu Operation and Structure
Sessions/DLCI Table
The status of all virtual circuits is displayed here.
DLCI - The DLCI that is associated with this virtual circuit.
State - The state of the virtual circuit:
Inactive - means the circuit exists but has been deactivated by
the Frame Relay switch.
Exists - means the circuit exists at this point and should be
activated soon.
Active - means the circuit is fully active.
Off - means the circuit has been turned of by the DLCI mapping
active selection.
Tx Frames - Number of Frame Relay packets that have been
transmitted via this DLCI.
Rx Frames - Number of Frame Relay packets that have been
received via this DLCI.
Tx Bytes - Number of Frame Relay bytes that have been
transmitted via this DLCI.
Rx Bytes - Number of Frame Relay bytes that have been
received via this DLCI.
IP SubIfc - The IP router port assigned for this DLCI.
Possible ports are fr0, fr1, ... , fr9. None means that this DLCI not used
for routing IP.
IPX SubIfc - The IPX router port assigned for this DLCI.
Possible ports are fr0, fr1, ... , fr9. None means that this DLCI not
used for routing IPX.
Bridge Group - The bridge group that this DLCI belongs to
(Group 1 or Group 2). None means that this DLCI is not used for
bridging.
72
Express L768/L1.5 User Manual
61202192L1-1
Advertisement
Table of Contents
