Route/Force Ip; Ip/Rip; Rip/Mode; Rip/Protocol - ADTRAN Express L768 User Manual

Hdsl router/bridge
Hide thumbs Also See for Express L768:
Table of Contents

Advertisement

Route/Force IP

Write security: 3; Read security: 5
When set to Yes, the Express L768/L1.5 will force the PPP peer to use the IP
address in the IP/Net for this profile as its WAN IP address. Normally this is
set in the No (def) position.

IP/RIP

The RIP parameters can be adjusted from their defaults under this menu.

RIP/Mode

Write security: 3; Read security: 5
The Express L768/L1.5 will perform RIP over the WAN connection when this
is set to On (def).

RIP/Protocol

Write security: 3; Read security: 5
The Express L768/L1.5 can perform version 1, V1 (def), or version 2, V2, of RIP
on this WAN connection.

RIP/Method

Write security: 3; Read security: 5
Split Horizon - Only routes not learned on the WAN connection
are advertised.
Poison Reverse (def) - All routes are advertised, including routes
learned from the WAN connection. These routes are poisoned.
None - All routes are advertised, including routes learned from
the WAN connection. No attempt is made to poison these routes.

RIP/Direction

Write security: 3; Read security: 5
Tx and Rx (def)- RIP advertisements are transmitted and listened
to on the WAN connection.
Tx only - RIP advertisements are transmitted and not listened to.
Rx only - RIP advertisements are listened to but not transmitted.
61202192L1-1
Chapter 3: Terminal Menu Operation and Structure
Express L768/L1.5 User Manual
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express l1.5

Table of Contents