Filter Defines /Pattern Filter Defines; Filter Defines /Ip Filter Defines - ADTRAN Express 4110 User Manual

61200176L3-1

Filter Defines /Pattern Filter Defines

Write security: 2; Read security: 3
The pattern filter is applied to bridge packets only. That is any packet
which is forwarded by the bridge functionality of the Express 4110/4120.
Up to 32 pattern defines can be specified.
Name
Offset
Pattern
Mask

Filter Defines /IP Filter Defines

Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or
bridged. Up to 32 IP defines can be specified.
Name Identifies the filter entry
IP Src IP address compared to the source address.
(dotted decimal format)
Src Mask Bits which are used in the source comparison.
(dotted decimal format)
IP Dest IP address compared to the destination address.
(dotted decimal format)
Dest Mask Bits which are used in the destination compari-
son. (dotted decimal format)
Src Port IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Type of comparison that is performed
Src Port Cmpr
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
Express 4110/4120 User Manual
Chapter 3. Terminal Menu Operation and Structure
Identifies the filter entry
Offset from beginning of packet of
where to start the pattern comparison
64 bits used for comparison. (hexa-
decimal format)
Bits in the pattern to be compared.
(hexadecimal format)
None means the source port is not compared
3-33