Power smart DB2801 Instruction Manual page 9

• Malfunctioning switch – Do not use the snow thrower if the switch does not turn it on and off.
Any appliance that cannot be controlled by the switch is not safe to use and must be repaired.
• Hitting an object – If the snow thrower accidentally strikes an object, first stop the snow thrower
and remove the battery; next, inspect for damage; finally, repair or replace any damaged part
before restarting and operating the snow thrower.
• Discharge chute safety – Never direct the snow discharge chute at the operator, at bystanders, at
vehicles, or at windows. The discharged snow, which may contain foreign objects accidentally
picked up by the snow thrower, can cause serious damage and personal injury. Do not use your
hands to unclog the discharge chute. Stop the motor before removing debris.
• Hand-held operating position – Operation of the snow thrower in the hand-held position is
unsafe.
• Abnormal operation – If you find that the snow thrower is not running properly or hear abnormal
sounds from the engine, immediately stop the machine, remove the battery, and customer service
center at 1-800-7919458 for assistance.
• Noise control – When using the snow thrower, respect the local laws and regulations regarding
noise control and environmental protection. To avoid noise disturbance, you should carefully
decide upon an appropriate operation time and consider the surrounding conditions.
• When work is completed – Disconnect the snow thrower from the power source when not in use,
when changing accessories, and before performing any maintenance task.
• Store safely – Store the snow thrower indoors in a dry area between uses. Keep in a locked area,
where children and unauthorized users cannot gain access. Do not store the machine while it is
still connected to the power source. It may cause damage and injury.
• Maintain for safety and longevity – Check for misalignment or binding of moving parts,
breakage of parts, and any other conditions that may affect the unit's operation. If damaged, repair
or replace the damaged part before use. Use only those replacement parts made for your model.
When replacing any parts, you must strictly observe the instructions and procedures described in
this manual.Special care should be paid to any rubber parts, since these parts may increase the
engine load and decrease its mechanical power if damaged.
Electrical Safety
• Electrical plugs must match the outlet – Never modify the plug in any way. Do not use any
adapter plugs with grounded appliances. Unmodified plugs and matching outlets will reduce the risk
of electric shock.
• Avoid accidental starting – Make sure the safety switch and the switch bar lever is in the OFF
position before inserting the battery pack into the unit. Do not carry the snow thrower with the safety
switch and switch bar lever engaged.
9