Install Cylinder - Yale nexTouch Installation And Programming Instructions

2

Install Cylinder

Test Cylinder
Part of ASSA ABLOY
X
Use key to thread
cylinder. Pull key
out of cylinder to
first blade cut for
best operation.
If using cylinder other than 1-1/8", a new collar must
be used that is sized appropriately for cylinder length.
Test cylinder by turning key counter-clockwise to unlock trim.
If there is any binding then cylinder is not at correct depth
and needs to be threaded further into escutcheon.
4
Tighten
counter-clockwise
to secure lock.
80-8470-0900-000 04-21