Yale nexTouch Installation And Programming Instructions page 20

Definitions
All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except
Master) PIN code access. When attempting to enter a code while unit is in Lockout, there will be an audible
lock response. The touchscreen keypad will display a RED locked padlock. (Main Menu selection #6.)
Automatic Re-lock Time: After a successful unlock, unit will re-lock automatically after 5 seconds or for a
duration selected in Advanced Lock Settings. (Main Menu selection #3 then #1)
Eco Mode: When enabled, Eco Mode puts unit in low power mode extending life of battery.
Inside Indicator Light: This light will blink red when the trim is locked.
Language Setting Mode: Choose English (1), Spanish (2) or French (3) for lock's voice prompts. (Main Menu
selection #5)
Low Battery: When battery power is low, the Low Battery Warning indicator is a flashing red battery icon on the
touchscreen keypad and the Yale logo will flash red on the push button keypad. If battery power is completely
lost, use 9Volt battery override. To use 9V battery override apply 9V battery, in either direction, to terminals on
the touchscreen for backup power option. Activate the touchscreen and enter your pin code to unlock door.
Master PIN Code: The Master PIN code is used for programming and for feature settings. It must be created
prior to programming lock. The Master PIN code will also unlock/lock the lock except when Accentra Key
Module is installed.
Network Module Setting: With optional Network Module installed, this setting becomes available (Main Menu
selection #7) and allows the lock to connect with a network controller.
One Touch Locking: When unit is unlocked, activating the lock will lock unit (during Automatic Re-lock
duration or when Automatic Re-lock is disabled). When One-Touch Re-lock is not in use (disabled), any valid
PIN code will re-lock the lock. (Main Menu selection #3 then #3.)
Passage PIN Code: When used to unlock, lock will remain unlocked/open. Lock cannot be locked/secured
until Passage code is entered again.
Privacy Button to Lock Door: If Automatic Re-lock is disabled, a short 1 second press of this button will lock
the door.
Privacy Mode: With optional Door Position Switch installed, Privacy Mode enabled thru Menu Mode and door
closed, all keypad functions can be disabled with a 3 second press of the Privacy Button. Privacy Mode is
disabled by default. Enable Privacy Mode thru Main Menu selection #3 then #4. With door closed, press and
hold the privacy button until voice prompt indicates Privacy Mode is enabled. Privacy Mode duration ends
when door is opened and voice prompt indicates Privacy Mode is disabled.
Shut Down Time: Unit will shut down for sixty (60) seconds and not allow operation after wrong code entry
limit (5 attempts) has been met. When unit is in Shut down, keypad will be flashing.
Tamper Alert: Audible alarm sounds if attempting to forcibly remove outside lock from door.
User PIN Code: The User code operates the lock. Maximum number of user codes is 500.
Volume Setting Mode: The volume setting for PIN code verification is set to HIGH (1) by default; otherwise it
can be set to Low (2) or Silent (3) for quiet areas. (Main Menu selection #4)
Wrong Code Entry Limit: After five (5) unsuccessful attempts at entering a valid PIN code, lock will not accept
a PIN code for duration of shut down time. The touchscreen keypad will flash and a red lock symbol will be at
bottom of keypad. The push button keypad will flash and Yale icon will flash blue for shut down period. Keypad
will be available after shut down time is complete.
80-8470-0900-000 04-21
Part of ASSA ABLOY
20