Page 1
Yale Real Living ® Key Free Touchscreen Deadbolt with ® Installation and Programming Instructions #8-32 x 5/16" Machine screws #7 wood & #8-32 M6x47mm machine x 20mm Long through bolt Combination screws FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO...
Page 2
Preparing Door P/N AYRD-120-INST-FUL Rev G...
Page 3
Installing Latch & Strike Plate 2-3/8" position d faut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. P/N AYRD-120-INST-FUL Rev G...
Page 4
Installing Touchscreen Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. P/N AYRD-120-INST-FUL Rev G...
Testing Operation Bolt must be in retracted (unlocked) position before installing AA batteries. P/N AYRD-120-INST-FUL Rev G...
Page 9
Handing the Lock Press Enter new Master PIN code (4-8 digits). Press to complete. After entering the Master PIN code, press any key to complete handing. P/N AYRD-120-INST-FUL Rev G...
Installing Cover Congratulations, you've installed the Yale Real Living ® Key Free Touchscreen Deadbolt T1L with ! T urn sheet over for Programming Instructions to customize your product. P/N AYRD-120-INST-FUL Rev G...
Master PIN Code must be created before any further programming. Max User Codes = 100 Warning: Changes or modifications to this device, not expressly approved by Yale Security Inc. could void the user's authority to operate the equipment. P/N AYRD-120-INST-FUL Rev G...
Unlocking Door with PIN Code Enter PIN Press "Unlock" Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 100 Users) User Type User Name User # PIN Code Master User ___ User ___ User ___ User ___ User ___ User ___...
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see "Factory Default Settings"). 1. Remove the battery cover. 2.
Page 16
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the touchscreen flashes 8 times and the lock beeps 3 times as well. Audio Mode: Choosing Disable (3)
Feature Programming Through Menu Mode Using Master PIN code* key. 1. Enter the 4-8 digit Master PIN code followed by the 2. Enter digit corresponding to the function to be performed followed by the key. *The Master PIN code must be registered prior to any other programming of the lock. User Number (PIN) 1~100: with network module Master PIN Code Setting...
Programming Troubleshooting Symptom Suggested Action • Press each touchscreen key for response when pressed. • Check batteries are installed and oriented correctly (polarity) Lock does not respond – in the battery case. door is open and • Check batteries are in good condition; replace batteries* accessible.
Page 19
FCC: ® FCC ID: U4A-YRIZW1US (Z-Wave ) Model(s): YRD120-ZW-US This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.