Restoring The Factory Defaults - Cisco RV120W Administration Manual

Administering Your Cisco RV120W

Restoring the Factory Defaults

Restoring the Factory Defaults
!
CAUTION
STEP 4
!
CAUTION
Cisco RV120W Administration Guide
During a restore operation, do not try to go online, turn off the router, shut down the
PC, or do anything else to the router until the operation is complete. This should
take about a minute. When the test light turns off, wait a few more seconds before
doing anything with the router.
To restore factory defaults to the router, choose Administration > Restore Factory
Defaults. Click Default.
Do not perform this procedure unless you want to erase all configuration you have
performed on the router.
7
135