Configuring Wi-Fi Protected Setup - Cisco RV120W Administration Manual

Configuring the Wireless Network

Configuring Wi-Fi Protected Setup

STEP 8
STEP 9
Configuring Wi-Fi Protected Setup
STEP 1
STEP 2
NOTE
STEP 3
STEP 4
Cisco RV120W Administration Guide
environment. This function boosts the Cisco RV120W's ability to catch all wireless
transmissions but severely decreases performance.
The Short Retry Limit and Long Retry Limit fields determine the number of times
the Cisco RV120W will reattempt a frame transmission that fails. The limit applies
to both long and short frames of a size less than or equal to the RTS threshold.
Click Save.
You can configure Wi-Fi Protected Setup (WPS) on the Cisco RV120W to allow
WPS-enabled devices to more easily connect to the wireless network.
Choose Wireless > WPS.
In the VAP field, select the wireless network on which you want to enable WPS.
The network must use WPA, WPA2, or WPA+WPA2 security.
You can enable WPS on only one of the four networks, or virtual access points.
Under WPS Status, choose Enable to allow WPS configuration. By default, WPS is
disabled.
Click Save.
3
62