Table of Contents
Advertisement
System notifications
The following icons will be displayed on the screen's status bar.
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Station software update.
Press INFO to start the process.
Process analysis
Optimize your production after analysing the information provided by the graphics.
By pressing Graphics in the Utilities MENU, temperature and power figures in real
time are displayed for each port. This helps you decide how to adjust your process
or which tip to use to obtain the best quality soldering.
Graphics
Power (%)
Temperature
Export graphics
Insert a USB flash drive into the USB-A
connector to save your soldering process in
csv format.
8
450
350
250
150
50
p1 - Temp
Warning.
Press INFO for failure description.
Error.
Press INFO for failure description,
the type of error and how to proceed.
Indicates there is a peripheral to be
installed.
Change port
?
17:14
p1 - Power
5
sec/div
100
75
50
25
0
Advertisement
Table of Contents
