Advanced Functionalities
It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Graphics
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC,
this new and unique feature allows controlling the heating ramp up rate of the tool to
gradually increase the temperature of the component through all the phases of the
soldering process. Up to 25 fully confi gurable soldering profi les can be stored.
Profi les
Export graphics
Insert a USB flash drive into the USB-A
connector to save your soldering
process in csv format.
Files
Station update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the file
downloaded to the station.
Update
System Notifications
The following icons will be displayed on the screen's status bar.
USB fl ash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot down-
loaded to the station.
6
Station software update. Press INFO to start
the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.