Utilities Submenu; System Notifications - jbc DME Series Instruction Manual

Utilities Submenu

It provides detailed graphics of tip temperature and power delivery in real-time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Graphics
Export graphics
Insert a USB flash drive into the USB-A
connector to save your soldering
process in CSV format.
Files
Play videos
Enables to play video files from a USB
device as long as it is in AVI format and
320x240px.
Video
Provides the possibility to connect a microscope* by USB connection to the station. The
image will be shown on the station display.
* compatible with: Dino Lite AM2111 and AM2011
Microscope
Provides calculator environment and function.
Calculator
Enables to convert, for example, ºC values into ºF values.
Convert

System notifications

The following icons will be displayed on the screen status bar.
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot. down-
loaded to the station.
6
Station software update. Press INFO to
start the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.