Adjusting Call Volume And Muting; Adjusting Call Volume; Using Mute; Putting A Call On Hold - Cisco SPA 525G User Manual

Using Basic Phone Functions

Adjusting Call Volume and Muting

Adjusting Call Volume and Muting

Putting a Call on Hold

Resuming a Call

Ending a Call

Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)

Adjusting Call Volume

To adjust the volume while you are on a call, press + on the Volume button to
increase the volume, or press - to decrease the volume. Press Save.
Pressing the Volume button while not on a call adjusts the volume of the phone's
ringer.

Using Mute

To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button lights red. Press the Mute button again to unmute.
To put a call on hold, press the Hold button. A series of beeps indicates the call is
on hold.
To resume the call, press the flashing red line button for the call. If you have
multiple calls, all calls are put on hold except the active call.
To end a call:
•
If you are using the handset, hang up.
•
If you are using the speakerphone, press the Speaker button.
•
If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
3
41