Manually Adding A Wireless Profile On The Cisco Spa 525G/525G2 - Cisco SPA 525G User Manual

Installing Your Phone
Connecting Your Phone to the Computer Network
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)
e. Enter the PIN into the field that allows you to setup wireless devices using a
PIN.
f. Save your changes.
g. On the Cisco SPA 525G/525G2, with PIN Configuration highlighted, press
Select. To add the connection as a profile, press OK. Your phone may reboot
before the Wi-Fi connection is working.

Manually Adding a Wireless Profile on the Cisco SPA 525G/525G2

To add a new wireless network profile:
In the Network Configuration screen, ensure Wi-Fi is enabled.
Scroll to Wi-Fi Configuration
Configuration screen.
Select Wireless Profile. Any previously configured wireless profiles are displayed.
Do one of the following:
• Scan for available networks. See
page 34.
• Manually add the network. See
Scanning for Available Networks
If your router has SSID (router name) broadcast disabled, it may not appear in the
list of networks. In that case, you need to manually add it (see
Network, page 35).
In the Wireless Profile screen, press Scan.
In the list of available networks, scroll to the desired network and click Add to
select the highlighted network.
. Press the Right Arrow key to enter the Wi-Fi
Scanning for Available Networks,
Manually Adding a Network, page
2
35.
Manually Adding a
34