Introduction - Heatrae Sadia STREAMLINE OVERSINK 95010283 Fitting Instructions And User Manual

1.0 INTRODUCTION

Thank you for purchasing a Heatrae Sadia Streamline Oversink Vented Water
Heater. The Streamline is manufactured in the UK to the highest standards and
has been designed to meet all the latest relevant safety specifications.
1.1 IMPORTANT POINTS
The Streamline must be installed and commissioned by a competent person.
Please read and understand these instructions before installing the Streamline.
Following installation and commissioning, the operation of the Streamline
should be explained to the user and these instructions left with them for future
reference.
The Streamline is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the
Streamline.
1.2 PACK CONTENTS
Before commencing installation check that all the following components have
been supplied with your Streamline Oversink Water Heater:
• Wall Mounting Bracket
• Fixing Plugs and Screws
• Spout
• Thermostat Knob
• Control Knob
• Control Knob Extension
• Flow Restrictor
3