Heatrae Sadia STREAMLINE OVERSINK 95010283 Fitting Instructions And User Manual page 9

FIGURE 08: SPOUT FRONT
SPOUT FRONT
3.6 ELECTRICAL
WARNING: THIS APPLIANCE MUST BE EARTHED. IT IS SUITABLE FOR
A.C. SUPPLY ONLY.
ELECTRICAL INSTALLATION MUST BE CARRIED OUT BY A COMPETENT
ELECTRICIAN AND BE IN ACCORDANCE WITH THE LATEST I.E.E. WIRING
REGULATIONS.
ENSURE THE ELECTRICAL SUPPLY IS SWITCHED OFF BEFORE MAKING
ANY CONNECTIONS TO THE STREAMLINE.
1. Connect the Streamline to a 230V or 240V a.c. earthed supply only.
2. A double pole isolating switch having a contact separation of at least 3mm
in each pole must be incorporated in the supply.
3. The Streamline must be fitted with a 3 core 1.5mm
cable must be fitted through the cable gland and connections made to
the internal terminal block as follows:
BROWN or RED to terminal marked "L"
BLUE or BLACK to terminal marked "N"
GREEN/YELLOW or GREEN wire to terminal marked
FIGURE 09 - WIRING DIAGRAM
CUT-OUT BULB
THERMOSTAT BULB
TO ELEMENT
2 1
CUT OUT
RESET
COMBINED THERMOSTAT
AND CUT OUT
SPOUT BODY
flexible cable. The
2
ELEMENT
EARTH POST
NEUTRAL (BLACK)
LIVE (RED)
TERMINAL BLOCK
GREEN&YELLOW
BLUE/BLACK
BROWN/RED
9